Tennsco Low Profile Shelving Units are your
solution when you need to maximize vertical
storage space and need unobstructed access
to stored items. The specially designed shelf
supports with particle board are only 11/8"
tall yet handle load capacities from 600-800 lbs
depending upon the steel-gauge and shelf size
you select. Widths available up to 48".
The 2¾" high steel beam of Tennsco's Wide Profile
Shelving Unit supports applications where decking
is used over longer spans. Whether your application
involves wire decking or particle board, Wide
Profile Shelving Units can handle your most
demanding storage need. Weight capacities range
from 1,250 lbs. to 2,500 lbs. depending
upon shelf size. Widths available up to 96".
Tennsco Medium Profile Shelving Units incorporate
a special 21/4" high v-beam design offering
heavy-duty support at an economical price. With
the added load capacity you’ll find hundreds of
uses in your factory or warehouse. Shelf supports
are available in either 16 or 14 gauge steel to
handle shelf load capacities ranging from 600
to 1,000 lbs. depending upon the gauge and
shelf size selected. Widths available up to 72".
Tennsco Channel Beam Shelving Units are your answer
to industrial strength storage applications. The 3¼" high
steel channel beam offers maximum strength for shelf
spans of 48" and longer. Load capacities range from
1,600 lbs. to 2,500 lbs., depending upon shelf size.
Widths available up to 96".
Flexible shelving components create a five-shelf unit or handy work table. Stur-D-Stor's boltless design allows
quick and easy set-up. Industrial grade particle board shelves with steel frames offer 1,000 lb. capacity per
shelf. Shelves adjust in 1/2" increments.
Create your choice of workbenches as shown above. Stur-D-Bench's boltless design allows quick and easy setup.
Industrial grade particle board shelves with steel frames offer 1,000 lb. capacity per shelf. Shelves adjust
in 1/2" increments. Depending on your application, choose between a full-width drawer unit with 60" riser,
60" drawer and 60" lower shelf or a half-width drawer unit with a 60" riser, 30" drawer, and 30" lower shelf.
Available in Accent Blue paint finish only.
Sturdy steel framework combined with strong steel shelving provides a strong yet cost-effective solution
to a wide range of storage requirements. Steel shelf clips attached to the uprights provide rigid and strong
connection points for the steel shelves, removing the need for sway braces and allowing for unobstructed
access from all four sides. Shelves on both Starter and Adder units can be adjusted on 11/2" increments.
Available widths are 36", 42", and 48". Shelf depths are 12", 18", 24" and 36" to suite your specific needs.
Note: Medium shelf supports are required to stabilize the unit at top and bottom.
Rack designed to hold record storage boxes
for archival purposes. May be ordered with
or without particle board decking to allow
you to use your own shelf surface.Special units with angle supports allow record
storage boxes to slide in and out of individual
channels for complete organization. Available
in a single or double entry unit.
